Blog

Blog

Location:Home > Blog

Can your graphitization furnace be adapted to overseas power grids? Can the control power supply be flexibly configured?

Can your graphitization furnace be adapted to overseas power grids? Can the control power supply be flexibly configured?

"Export equipment needs to be compatible with different national power grid standards. How can vacuum heating power supplies flexibly adapt to 380V/415V/660V or other voltage levels? Wide Range Inp...May 20, 2026

[ Learn More 」
1
Does a graphitization furnace allow for input voltage fluctuations? Can it be used if the voltage fluctuates slightly?

Does a graphitization furnace allow for input voltage fluctuations? Can it be used if the voltage fluctuates slightly?

"Voltage fluctuations cause product stability drift? The adaptive voltage regulation function allows the graphitization furnace to operate accurately even with ±15% grid fluctuations. Adaptive Vol...May 20, 2026

[ Learn More 」
1
What is the power factor of a graphitization furnace? How does it compare to a traditional SCR power supply? IGBT vacuum heating power supply: the ult

What is the power factor of a graphitization furnace? How does it compare to a traditional SCR power supply? IGBT vacuum heating power supply: the ult

"Traditional SCR power supplies suffer from high harmonics and low power factor. How can IGBT vacuum heating power supplies achieve a power factor ≥0.95 and harmonics <5% using PWM modulation? PWM...May 20, 2026

[ Learn More 」
1
Is the furnace shell temperature high? The furnace shell temperature is ≤45℃, mainly due to the three major technical means behind the distinct hot an

Is the furnace shell temperature high? The furnace shell temperature is ≤45℃, mainly due to the three major technical means behind the distinct hot an

"Furnace internal temperature 3000℃, external temperature below 45℃—this is not magic, but the combined effect of three major technologies. Implementation principle. Double-layer water cooling: ...May 20, 2026

[ Learn More 」
1
Five-fold electrical protection: the guardian of electrical safety for graphitization furnaces

Five-fold electrical protection: the guardian of electrical safety for graphitization furnaces

"Electrical accidents are extremely sudden. A complete electrical safety system including five-fold protection against overcurrent/overvoltage/undervoltage/phase loss/leakage/short circuit + grounding...May 20, 2026

[ Learn More 」
1
Does the graphitization furnace have a cooling water alarm? Triple sensor + two-stage alarm + mechanical redundancy.

Does the graphitization furnace have a cooling water alarm? Triple sensor + two-stage alarm + mechanical redundancy.

"If the cooling water is interrupted, the coil is likely to fail within 10-30 minutes. A complete protection system is provided by triple sensors for flow/pressure/temperature + two-level alarms for e...May 20, 2026

[ Learn More 」
1
Home Prev <... 5 6 7 8 9 10 11 12 13 14 ...> Next End